Code: TSP 130Filler spray for correcting superficial defect in surfaces such as coarse sanding grooves, small stone-chip damages, etc.
Beware: the use of an aerosol often provides a convenient, fast and economic solution of a problem but can never replace a 2K product or extend the warranty given by the paint supplier in the complete repair process. Therefore potential technical issues as a consequence of using aerosols in a guaranteed operation painting system may never lead to any claims to our product or company
Very fast drying, very fast solvent resistant (aliphatic/aromatics/alcohols) excellent adhesion, easy sandabillity. Good filling properties, good flexibility, good hardness. Due to the use of zincphosfate in the product it can be used directly to metal. It has good anticorrosion properties but for the best anticorrosion effect, the use of special anticorrosion primer is recommended. Can be overpainted with most modern paints.
– Universal primer/filler in white, light grey, grey and dark grey suitable to finish with all solvent and water based 1K and 2K paints.
– Can be applied on all surfaces, ideal for fast repairs after sanding too hard. Also ideal for spot or panel repair, especially for smaller surfaces.
– Apply fine layers. If you desire a thick layer: first apply 1 full layer at a distance of 30-35cm and afterwards finish with a crosswise layer at a distance of 20cm.
– All primer/fillers sprays have a special nozzle which sprays a flat vertical pattern, comparable to a spray gun.
– Primer with a high viscosity: shake the can very well before the first use.
