Fiberglass Body Filler AVR – 2 Sizes – Canadian Branded

Our #1 selling, Fiberglass reinforced body filler. High strength, high build and waterproof which makes it excellent for repairing holes, rusted metal, body seams and shattered fiberglass.Blue cream hardener included. Canadain Branded. APPROVED DESCRIPTION: AVR is a fiberglass multi-fiber reinforced body repair filler ideal for use on metal for finishing welded seams, rusted metal repairs, and repairing composites for filling holes in SMC/Fiberglass, and shattered fiberglass. APPROVED SUBSTRATES: Steel Galvanized Steel Aluminum SMC Fiberglass Most Rigid Plastics PREPARATION: Clean and degrease the entire panel to be repaired with soap and water, followed by a mild cleaning solvent. Surface must be thoroughly dry before repairing or applying material. Keep the repair area small. Use 40-80 grit to remove the paint and featheredge. MIXING: Stir the filler before using. Knead the cream hardener. Measure hardener 2% by weight (add a ribbon of cream hardener from edge to edge across the center of a 4” diameter puddle). Puddles larger than 4” (10 cm) in diameter will require additional hardener. Mix thoroughly until uniform color is achieved. Approximate setting time is 5-6 minutes @ 72°F-80°F (22°C) APPLICATION: Apply in layers with even firm pressure. Do not apply all at once. FINISH: Sand filler with 80 grit sandpaper. If necessary, reapply additional coats, or apply a finish coat of any AVR lightweight filler or polyester putty.